About the finishing

About oil finish

At Hiromatsu Mokko, we strive to create products that take advantage of the texture and characteristics of solid wood, and many of our products feature a natural oil finish.
The best thing about an oil finish is the feel it gives to the skin.
You can enjoy the moist texture that only solid wood can provide, and it brings out the deep, solid feel and beauty of the wood grain to the fullest.
On the other hand, this finish is prone to scratches and stains, but the scratches and stains that appear with daily use are proof that the product is loved by your family.
As long as you maintain it regularly, you can use it without worrying too much about scratches or stains.

*Because it is made of natural wood, each piece will have different grain and color. In order to match the color, we use coloring oil that matches some of the wood.

About soap finishing

Soap finish uses soapy water as a protective paint for wood.
It does not damage the natural texture of solid wood and the finished product does not have a wet color, so it brings out the natural wood feel.
Although the finish is prone to scratches and stains, with regular maintenance you will be able to enjoy the changes that occur over time without worrying too much about scratches or stains.

About lacquer painting

Lacquer painting is a painting method in which a base material lacquer is sprayed onto the surface of wood to cover it with a film.
The coating is thin and smooth, resulting in a finish that brings out the natural texture and feel of the wood, and also makes the surface less susceptible to minor dirt.
On the other hand, because the coating is thin, it is vulnerable to heat and moisture, and is prone to ring stains.
Please use placemats, coasters, pot mats, etc.
The expected service life is approximately 5 to 7 years*1, and after that, the paint may begin to peel off due to deterioration.
In that case, repainting and repair will be required, and maintenance will be done at the factory.

*1: This is just a general guideline. Actual results may vary depending on usage and environment.

About urethane coating

Urethane painting is a painting method in which urethane resin is sprayed onto the surface of wood to cover it with a film.
By covering the surface with a hard film, dirt and stains are less likely to adhere, and regular maintenance is not required.
It also reduces the movement of wood, making it less likely to crack or warp.
On the other hand, the texture and feel of the wood becomes less noticeable, and a glossy shine will appear with each year of use.
The expected service life is approximately 6 to 8 years*2, and after that, the paint may begin to peel off due to deterioration.
In that case, repainting and repair will be required, and maintenance will be done at the factory.

*2: This is just a general guideline. Actual results may vary depending on usage and environment.

About Udukuri

Uzukuri processing is a technique in which the surface of the natural wood is rubbed to create an uneven surface and bring out the grain.
When the surface of the wood is rubbed and polished, the soft parts of the annual rings (spring and summer grains*3) are scraped off, beautifully highlighting the grain and expressing the natural thinning of wood over time.
Another appeal of Uzukuri processing is that you can enjoy the texture of the wood with your eyes and your touch.
This construction method is mainly used for the Gala, Santa Fe, and WF series.

*3: Tree annual rings (growth rings) have hard parts with small growth widths and high cell density, and soft parts with large growth widths and low cell density. These soft parts are called spring and summer eyes.

About "Destressing"

Distressing is a technique that creates an antique look by deliberately adding marks such as “knocks※4”, scratches, and insect holes.
A craftsman applies scratches by hand to each piece to give it the look of years of use, and no two pieces have the same appearance.
We also hope that as customers use the piece for many years, it will take on its own unique flavor and become a one-of-a-kind piece of furniture that will become part of their family's landscape.
This construction method is mainly used in the Gala Santa Fe Shaker series.

*4: A technique in which traces of the tools left on the surface of the board are considered to add character.